Automobile Bearings Factory - Thrust Ball Bearing – LGGB
Automobile Bearings Factory - Thrust Ball Bearing – LGGB Detail:
Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.
Single direction thrust ball bearings: consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces.
Double direction thrust ball bearings: have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. The shaft washer has raceways on both sides and is fixed on the journal. Bearings are able to carry only axial forces in both directions.
Product detail pictures:
Related Product Guide:
We provide good power in high-quality and progress,merchandising,revenue and internet marketing and operation for Automobile Bearings Factory - Thrust Ball Bearing – LGGB , The product will supply to all over the world, such as: Porto, Italy, Ottawa, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.
By Sabina from Paraguay - 2017.06.25 12:48
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Bertha from Hongkong - 2018.11.28 16:25
